Pool Maintenance Checklist

Pool Maintenance Checklist

Daily Tasks

• Skim leaves, bugs, and debris from the surface
• Empty skimmer and pump baskets
• Check water level (should be mid‑skimmer opening)
• Run pump for 8–12 hours to circulate water

Weekly Tasks

• Test and adjust water chemistry:
• pH: 7.2–7.6
• Chlorine: 1–3 ppm
• Alkalinity: 80–120 ppm
• Brush pool walls, steps, and tiles
• Vacuum pool floor (manual or automatic)
• Shock pool after heavy use or rain
• Inspect filter pressure gauge

Monthly Tasks

• Deep clean filter (backwash sand/DE or rinse cartridge)
• Inspect pump, heater, and other equipment for leaks/noise
• Add algaecide if algae growth is common
• Check for cracks in plaster or loose tiles
• Lubricate O‑rings and gaskets

Seasonal Tasks

Spring Opening:

• Remove cover, clean debris
• Test and balance water chemistry
• Inspect equipment before use
• Summer:
• Increase testing frequency during heat waves
• Use solar cover to reduce evaporation
• Fall:
• Skim leaves more often
• Lower water level if closing pool
• Winter Closing:
• Drain equipment and lines
• Add winterizing chemicals
• Secure cover tightly

Emergency Quick Checks

• Cloudy water → Test chlorine & pH immediately
• Algae bloom → Shock pool + brush walls
• Falling water level → Inspect for leaks
• Pump not running → Check breaker, basket, and seals